| 鲁西青邑韧性剪切带运动学涡度及剪切作用类型 |
| 点此下载全文 |
| 引用本文：王新社,张尚坤,张富中,杨崇辉.2005.鲁西青邑韧性剪切带运动学涡度及剪切作用类型[J].地球学报,26(5):423-428. |
| DOI：10.3975/cagsb.2005.05.05 |
| 摘要点击次数: 3131 |
| 全文下载次数: 2282 |
|
| 基金项目:国家自然科学基金项目（编号：40102017）和原地质矿产部“1：5万田黄、土旺幅区域地质调查”项目 |
|
| 中文摘要:青邑韧性剪切带是晚太古代末期发育在鲁西前寒武纪基底花岗岩中一条规模较大的韧性剪切带。剪切带NW走向，面理直立，线理水平，剪切标志反映右行剪切。石英光轴法求得运动学涡度在0．96～0．99之间变化，极摩尔圆法求得糜棱岩化岩石运动学涡度为0．91，初糜棱岩运动学涡度为0．87，糜棱岩运动学涡度为0．81，超糜棱岩运动学涡度为0．60。运动学涡度表明，剪切带剪切作用类型为一般剪切，变形初期以单剪为主，随应变的增大，运动学涡度值逐渐减小，变形的纯剪分量不断增加，最后以纯剪为主。剪切作用类型及三维参照变形分析表明，青邑韧性剪切带属加长一变宽类型的一般剪切带并且在Y轴方向上有所增长。韧性剪切在太古代末期克拉通化过程中具有加厚陆壳的作用。 |
| 中文关键词:运动学涡度 剪切作用类型 三维变形 青邑韧性剪切带 |
| |
| Kinematic Vorticities and Shear Types of the Qingyi Ductile Shear Zone in Western Shandong |
|
|
| Abstract:The Qingyi ductile shear zone (QDSZ) developed in Late Archean is a large-size ductile shear zone in granite of the western Shandong Precambrian basement. The QDSZ trends NW-SE with nearly vertical foliation and subhorizontal lineation. The shear indicators and quartz c-axial fabrics in the zone imply dextral strike-shearing. Kinematic vorticity numbers in the QDSZ obtained through quartz C-axial fabrics analysis range from 0.96 to 0.99. Kinematic vorticity numbers given by polar Mohr constructions of mylonitic rocks, protomylonite, mylonite and ultramylonite are 0.91,0.87,0.81 and 0.60, respectively. Kinematic vorticity numbers show that the shear type of the QDSZ was at first a general shear, and the pure shear component gradually increased with deformation. Analyses of the shear type and the three-dimensional deformation demonstrate that the QDSZ belongs to a lengthening-broadening shear zone with the lengthening quite obvious along the Y-axis. This means that ductile shearing played a role of crust-thickening du-(ring) the cratonization at the end of Archean. |
| keywords:kinematic vorticity type of shear three-dimensional deformation Qingyi ductile shear zone |
| 查看全文 查看/发表评论 下载PDF阅读器 |
